High Power LED Traffic Light PCB and Electronic Components Stores Featured Image

Lub Hwj Chim Loj LED Tsheb Teeb PCB thiab cov khw muag khoom siv hluav taws xob

Xa email rau peb

Product Detail

Khoom Paub meej

Cov khoom siv hauv paus: FR-4, FR2.Taconic, Rogers

Copper Thickness: 1/2 oz min;12 oz max

Board Thickness: 0.2mm-6.00 hli (8mil-126mil)

Min.Qhov Loj: 0.1mm (4mil)

Min.Kab Dav: 0.075mm (3mil)

Min.Kab nrug: 0.1mm4mil)

Surface Finishing: Immersion Kub / Au, HASL, OSP, thiab lwm yam.

Warp & Twist: 0.7%

Qhov Txoj Haujlwm: +/- 0.075mm (3mil) CNC Drilling

Rwb thaiv tsev Resistance: 10Kohm-20Mohm

conductivity: <50 ohm

Kev ntsuas hluav taws xob: 10-300V

ANCE Control: +/- 10%

Txawv impenitence: +-/10%

Cov txheej txheem kam rau ua: +/- 0.125mm (5mil) CNC Routing +/- 0.15mm (6mil) los ntawm Punching

Qhov taub (H) PTH L: +/- 0.075mm (3mil) NON-PTH L: +/- 0.05mm (2mil)

Tus neeg xyuas pib dav (W): +/- 20% ntawm thawj artwork PTH L: +/-0.

Peb Cov Kev Pabcuam

Peb tuaj yeem muab kev pabcuam ib-nres:

1. PCB pawg thawj coj saib.

2. E-test.

3. Cov khoom siv hluav taws xob yuav khoom.

4. PCB sib dhos: muaj nyob ntawm SMT, BGA, DIP.

5. PCBA muaj nuj nqi kuaj.

6. Enclosure sib dhos.

PCB khoom Capacity

PCB Muaj peev xwm
Yam khoom	Specification
Khoom siv	FR-4, FR1, FR2;CEM-1, CEM-3, Rogers, Teflon, Arlon, Aluminium Base, Copper Base, Ceramic, Crockery, thiab lwm yam.
Lus hais	Siab Tg CCL muaj (Tg> = 170 ℃)
Ua tiav Board Thickness	0.2 hli-6.00mm (8mil-126mil)
Nto tiav	Kub ntiv tes (>= 0.13um), Kub Kub (0.025-0075um), Plating Kub (0.025-3.0um), HASL (5-20um), OSP (0.2-0.5um)
Cov duab	Routing, Punch, V-txiav, Chamfer
Kev kho saum npoo	Solder Mask (dub, ntsuab, dawb, liab, xiav, tuab> = 12um, Thaiv, BGA)
	Silkscreen (dub, daj, dawb)
	Peel tau-mask (liab, xiav, tuab> = 300um)
Yam tsawg kawg nkaus Core	0.075 hli (3mil)
Tooj Thickness	1/2 oz min;12 oz max
Min Trace Dav & Kab nrug	0.075 hli / 0.075mm (3mil / 3mil)
Min qhov taub rau CNC Drilling	0.1 hli (4mil)
Min qhov taub rau Punching	0.6 hli (35mil)
Lub vaj huam sib luag loj tshaj plaws	610mm * 508mm
Qhov Chaw	+/- 0.075mm (3mil) CNC Drilling
Tus neeg xyuas pib dav (W)	+/- 0.05mm (2mil) lossis +/- 20% ntawm thawj
Qhov taub (H)	PTHL: +/- 0.075 hli (3mil)
Qhov taub (H)	Tsis yog PTHL: +/- 0.05mm (2mil)
Daim Ntawv Qhia Txog Tus Kheej	+/- 0.1mm (4mil) CNC Routing
Warp & Twist	0.70%
Rwb thaiv tsev Resistance	10Koom-20Mohm
Kev coj ua	<50 ohm
Test Voltage	10-300V
Vaj Huam Sib Luag Loj	110 x 100 hli (min)
Vaj Huam Sib Luag Loj	660 x 600mm (max)
Txheej-txheej txheej misrepresentation	4 txheej: 0.15mm (6mil) max
Txheej-txheej txheej misrepresentation	6 txheej: 0.25mm (10mil) max
Min nrug nruab nrab ntawm qhov ntug mus rau circuitry qauv ntawm ib txheej sab hauv	0.25 hli (10mil)
Min qhov sib nrug ntawm lub rooj tsav xwm txheej txheem rau cov qauv Circuitry ntawm ib txheej sab hauv	0.25 hli (10mil)
Board thickness kam rau ua	4 txheej: +/- 0.13mm (5mil)